- Flocculation Powder: Part #9211 (1.5kg)
- Main Filter: R8703 (5 pack)
- Primary Filter: R8702 (5 pack)
Drester 1050L/D – Brand new! – Gun Cleaner for water borne paint systems.
Easy to use
Water borne paints are considerably harder to remove from spray guns than conventional paints. Therefore the Drester 1050 has been supplied with a pre-wash brush and a rinse gun. The brush and the rinse gun are fed with recycled water. The 1050 includes an air blow gun for drying after cleaning and a quick connect whip line for blowing out the spray gun paint channel.
It can also be equipped with a Flush Gun, enabling use with other rinsing water/solvent as often provided by the paint manufacturers.
Low water consumption and recovery
Thanks to the effective cleaning and water reuse facility water consumption is low and the environmental impact is reduced. Water recovery is achieved by adding a flocculating agent when the Drester 1050 is full of soiled water. The liquid is agitated automatically with air. After filtration the water can be reused or pumped out through the brush.
Efficient filter system
The Drester 1050 ensures simple and efficient filtration of wash water. The paint remains are captured in a pre-filter which can be reused. A main filter traps the small particles in the liquid, resulting in clear, recycled water. The use of two filters assures a simple handling and increases the life of the main filter.
Powerful diaphragm pump
The Drester 1050 is equipped with the powerful Drester teflon diaphragm pump for a quick and efficient cleaning of the spray gun.